Short Wave 254 Nm Industrial UV Light Sterilizer Lamp for Aquiculture

FEATURES

1. Long lifespan

2. High uv output

3. Small light decay

4. Waterproof structure, safe and reliable

5. Only capacitor needed by using electronic ballast

6. Ozone-free

7. Energy-saving

8. Large production capacity

9. EPA, ISO9001, CE certified

SPECIFICATIONS

1. Type: Integrated submersible

2. Peak Wavelength: 254nm

3. Input Voltage: 220vAC

4. Power: 19W/29W

5. Length: 305/432mm

6. Diameter: T5

7. Beam Angle: 360 degree

8. Operating Temperature Range: -10 degree - 100 degree

9. Materials: Quartz glass tube

10. Lifespan: 10000 hours

ADVANTAGE

1. The high purity quartz glass tube is adopted and treated with special technology, which further reduces the impurity content and makes the efficiency of lamp tube more stable.

2. Advance technology enables our lamp with high initial uv radiation and low uv light decay.

3. Ozone type and non-ozone type are available.

4. High output UV lamp is a better choice for reducing system size and maintaining uv output.

5. Corresponding quartz sleeve and ballast are available.

APPLICATIONS

Aquarium disinfection

Water treatment

Hospital UV lamp air sterilization operation procedure

The hospital is a place where regular sterilization is required. At present, the ultraviolet lamp is often used in hospital wards as a disinfection equipment, and the operation flow of the ultraviolet lamp is simply.

First check whether the UV lamp can be used normally, the ward, ready to be used, and the environment is prepared.

1. close the door and window

2. Do not leave patients and families in the ward, inform the purpose, understand, and work. Moving difficulties protects the eyes and skin exposure parts, bringing protective glasses to avoid direct illumination of ultraviolet lights.

3. plug the power, adjust the disinfection time.

4. when sterilizing, the room should be cleaned, dry, reduce dust, water fog. Suitable temperatures are 20 degree C -40 degree C, too high or too low, which will affect the disinfection effect, and appropriately prolong the disinfection time, and the relative humidity is greater than 80 percent , the irradiation time is also appropriately extended.

Adjust disinfection time (direct disinfection method)

The operator brings protective glasses to avoid direct light of the light, open the ultraviolet switch, and the disinfection immediately left the ward, and the irradiation time is not less than 30 minutes.

After disinfection, the management of ultraviolet lamps(short wave 254 nm industrial UV light sterilizer lamp for aquiculture)

1. The surface of the tube should be used frequently (once every 2 weeks) to wipe with 75 percent alcohol cotton ball, remove the dust and oil to reduce the impact on ultraviolet penetration.

2. the ultraviolet naked eye does not see, the tube radiation is not only the ultraviolet intensity, and the radiation illuminance value of the lamp should be detected, and the ultraviolet intensity can be used to determine the ultraviolet intensity instruction card, and determine the ultraviolet intensity instruction card. Whether the lamp reaches the life deadline. When the intensity is less than 70UW / cm², the uv lamp should be replaced in time.

maq per Qat: short wave 254 nm industrial UV light sterilizer lamp for aquiculture, China, suppliers, manufacturers, factory, customized, wholesale, bulk, pricelist, in stock, for sale